Biogenic Preparation of Biopolymer from the Ipomoea Batatas (Wheel Worm) Food Waste A Sustainable Approach

24 22

Authors

  • Mohanapriya Purushothaman Department of Biotechnology, St. Joseph’s College of Engineering, OMR, Sholinganallur- 600 119, India
  • Kalaivani S Department of Biotechnology, Karpaga Vinayaga College of Engineering and Technology, Madhuranthagam, Chengalpattu- 603308, India
  • Vikram Sah Department of Biotechnology, Aarupadai Veedu institute of Technology, Vinayaka Missions Research Foundation, Vinayaka Nagar, Paiyanoor- 603104, India

DOI:

https://doi.org/10.5281/zenodo.23485968

Keywords:

Ipomoea batatas, FTIR analysis, SEM analysis, Degradable test, Solubility test

Abstract

Bioplastic or Biopolymer is an eco-friendly alternative to conventional plastics. Bioplastic production will lead to the decrease in consumption of fossil fuel as well as reduce the plastic waste generation. Biodegradable plastic are two types: one is plastic material which will be decomposed in natural aerobic process and another is decomposed in anaerobic environment. In this research work the bioplastic were prepared using starch from Ipomoea batatas. The plant is one among the yam family this is an excellent source of high quality proteins. Starch from the grated peels obtained through solvent extraction method was effective potential quantitatively. Further, the biopolymer was casted based on the different concentration under spin coater and characterization studies - FTIR analysis, SEM analysis research could be extend to study the mechanical property and its level of food packaging material.

References

Álvarez-Chávez, C. R., Edwards, S., Moure-Eraso, R., & Geiser, K. (2012). Sustainability of bio-based plastics: General comparative analysis and recommendations for improvement. Journal of Cleaner Production, 23(1), 47–56. https://doi.org/10.1016/j.jclepro.2011.10.003.

Austin, D. F., Staples, G. W., & Simão-Bianchini, R. (2015). A synopsis of Ipomoea (Convolvulaceae) in the Americas: Further corrections, changes, and additions. Taxon, 64(3), 625–633. https://doi.org/10.12705/643.14

Barker, M & Stanfford, R. (2009). Industrial uses for crops: Markets for bioplastics. Project report., Homegrown Cereals Authority, HGCA, 62-63.

Barker, T., Bashmakov, I., Alharthi, A., Amann, M., Cifuentes, L., Drexhage, J., Duan, M., Edenhofer, O., Flannery, B., Grubb, M., Hoogwijk, M., Ibitoye, F. I., Jepma, C. J., Pizer, W. A., & Yamaji, K. (2007). Mitigation from a cross-sectoral perspective. In B. Metz, O. R. Davidson, P. R. Bosch, R. Dave, & L. A. Meyer (Eds.), Climate change 2007: Mitigation. Contribution of Working Group III to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge University Press.

Biotec (2003). Biologische Naturverpackungen GmbH & Co. Emmerich, Germany.

El Kadi, S. (2010). Bioplastic production from inexpensive sources: Bacterial biosynthesis, cultivation system, production and biodegradability. VDM Publishing House.

Fathanah, U., Lubis, M. R., Rosnelly, C. M., & Moulana, R. (2013). Making and characterizing bioplastic from cassava (Manihot utilissima) peel starch with sorbitol as plasticizer. In Proceedings of the 7th International Conference of Chemical Engineering on Science and Applications (pp. 148–154).

Jabeen, N., Majid, I., & Nayik, G. A. (2015). Bioplastics and food packaging: A review. Cogent Food & Agriculture, 1(1), Article 1117749. https://doi.org/10.1080/23311932.2015.1117749.

Lubis, M., Harahap, M. B., Manullang, A., Alfarodo, Ginting, M. H. S., & Sartika, M. (2017). Utilization starch of jackfruit seed (Artocarpus heterophyllus) as raw material for bioplastics manufacturing using sorbitol as plasticizer and chitosan as filler. Journal of Physics: Conference Series, 801(1), Article 012014.

Mbouche Fanmoe, M. J., Tatsadjieu Ngoune, L., & Ndjouenkeu, R. (2021). Ipomea batatas leaf powder from Cameroon: Antioxidant activity and antihyperlipidemic effect in rats fed with a high-fat diet. Journal of Lipids, 2021, Article 5539878. https://doi.org/10.1155/2021/5539878

Mekonnen, T. H., Mussone, P. G., Khalil, H., & Bressler, D. C. (2013). Progress in bio-based plastics and plasticizing modifications. Journal of Materials Chemistry A, 1(43), 13379–13398. https://doi.org/10.1039/C3TA12555F

Momotaz, F., Sarkar, A., Hasan, N., & Chowdhury, H. K. (2022). Development of biodegradable plastics from potato starch with enhanced physico-mechanical properties comparative to the regular plastic. International Textile and Apparel Association Annual Conference Proceedings, 78(1). https://doi.org/10.31274/itaa.13732

Noomhorm, C., & Tokiwa, Y. (2006). Effect of poly(dioxolane) as compatibilizer in poly(ε-caprolactone)/tapioca starch blends. Journal of Polymers and the Environment, 14(2), 149–156. https://doi.org/10.1007/s10924-006-0014-7.

Pavithra, S., Selva Nandhini, P., Sneha, B., & Anbarasi, P. (2022). Characterization and synthesis of biofilm from Ipomoea batatas and Citrus hystrix with Cocos nucifera extract. Journal of Emerging Technologies and Innovative Research, 9(5), e697–e702. https://www.jetir.org/papers/JETIR2205584.pdf

Philp, J. C., Ritchie, R. J., & Guy, K. (2013). Biobased plastics in a bioeconomy. Trends in Biotechnology, 31(2), 65–67. https://doi.org/10.1016/j.tibtech.2012.11.009

Tornqvist, L., Vartia, P., & Vartia, Y. O. (1985). How should relative changes be measured? The American Statistician, 39(1), 43-46. https://doi.org/10.1080/00031305.1985.10479385

Zárate-Ramírez, L. S., Romero, A., Martínez, I., Bengoechea, C., Partal, P., & Guerrero, A. (2014). Effect of aldehydes on thermomechanical properties of gluten-based bioplastics. Food and Bioproducts Processing, 92(1), 20–29. https://doi.org/10.1016/j.fbp.2013.07.007

Downloads

Published

2026-06-30

How to Cite

Purushothaman, M., S, K. ., & Sah, V. (2026). Biogenic Preparation of Biopolymer from the Ipomoea Batatas (Wheel Worm) Food Waste A Sustainable Approach. International Journal of Environmental Science and Green Technology, ISSN: 3080-8693, 1(2), 1–8. https://doi.org/10.5281/zenodo.23485968

Issue

Section

Articles